Tools for car repair shops

Refine Search


120MM chain wrench for 1/2 oil filter (F05132)

120MM chain wrench for 1/2 oil filter (F05132)

Specification:Fastening with 1/2 inch ratchet or 21mm wrenchChain width: 23 mmDesigned for steel fil..

7.00€

18PCS SHOCK ABSORBER REMOVER / INSTALLER TOOL KIT

18PCS SHOCK ABSORBER REMOVER / INSTALLER TOOL KIT

Specifically design permits to repair and replace shock absorbers. Easy to reach the secure nut whil..

70.00€

23PC. UNIVERSAL SYSTEM RELEASE TOOLS

23PC. UNIVERSAL SYSTEM RELEASE TOOLS

Set for disconnection of all types of contacts in automobile electrical systems:•For the universal a..

50.00€

27pcs Pry Removal Master Kit. (FTXC1027)

27pcs Pry Removal Master Kit. (FTXC1027)

for removal of trim, paneling, etc.- allows a damage-free disassembly,even on painted surfaces- wide..

16.00€

3/8” DR. METRIC FLARE NUT CROWFOOT WRENCH SET

3/8” DR. METRIC FLARE NUT CROWFOOT WRENCH SET

Includes: 10,11,12,13,14,15,16,17,18,19mmMaterial: Carbon Steel with heat treatment Chrome Finish..

24.00€

7PCS LOCKING TOOL SET FOR VAG 1.2, 1.4,1.9, 2.0 TDI

7PCS LOCKING TOOL SET FOR VAG 1.2, 1.4,1.9, 2.0 TDI

To adjust the timing during replacing the belt or camshaft.APPLICATION:•VW: Lupo, Fox, Polo, Golf, G..

12.00€

A set of levers | 2 pcs. (34182)

A set of levers | 2 pcs. (34182)

Product descriptionThe crowbars are made of 40Cr steel, used for disassembly, prying, bending or ass..

7.00€

A set of pry bars | 4 pcs. (S-4PBS)

A set of pry bars | 4 pcs. (S-4PBS)

Pry bar set made for aligning, lifting or prying. Pry bars are made of drop forged heat treated blac..

8.90€

A set of specialized heads | external grooves | KM4 - KM12 | 9 pcs. (S-9GNS)

A set of specialized heads | external grooves | KM4 - KM12 | 9 pcs. (S-9GNS)

Descriptionfor easy loosening and tightening of grooved nuts according to DIN 981 standard on shafts..

41.00€

A set of tools for the installation of joints | horseshoe (SK1403)

A set of tools for the installation of joints | horseshoe (SK1403)

Descriptionallows dismantling and mounting of supporting jointssuitable for Mercedes Benz W211 (E-cl..

45.00€

Adapter | M27 x 1.0mm (XC8717-2)

Adapter | M27 x 1.0mm (XC8717-2)

Descriptionsuitable for most Bosch injectorsfor mounting on the external threadinner ring prevents d..

5.00€

Arch spreading/rolling tool (FVT12M)

Arch spreading/rolling tool (FVT12M)

Device for straightening or widening wheel arches.The arm is height-adjustable to different working ..

37.00€

Assortment of outer retaining rings | Ø 4 - 32 mm | 300 pcs. (A-TC506)

Assortment of outer retaining rings | Ø 4 - 32 mm | 300 pcs. (A-TC506)

4mm – 100pcs.5mm – 15pcs.6mm – 25pcs.8mm – 15pcs.9mm – 20pcs.11mm – 15pcs.12mm – 20pcs.13mm – 25pcs...

5.00€

Automotive Glass Cutter | 2 extra blades (T7012A)

Automotive Glass Cutter | 2 extra blades (T7012A)

Descriptionhardened bladeTechnical dataGross weight 280 gPackaging suitable for wall hanging YesHand..

8.00€

Axle Remover (10969)

Axle Remover (10969)

Descriptionnew modelfor removing the constant-velocity joints on the front drive shaftsfits for most..

22.00€

Axle Remover (A-037A)

Axle Remover (A-037A)

Quickly removes the CVJ from the drive shaft without damaging joint. Reduces risk of damage transmis..

13.00€

Ball joint remover height: up to 50 / 80mm | gap 22 mm (62806)

Ball joint remover height: up to 50 / 80mm | gap 22 mm (62806)

Descriptionadjustable in 2 stepscan be used in passenger cars and vansHeavy versionfor use with 17 m..

35.00€

Ball joint remover with handle | working width 17 mm (YT-0613)

Ball joint remover with handle | working width 17 mm (YT-0613)

Product descriptionPuller for 17 mm ball pins.Technical dataLength [mm] 265Carbon steel materialSize..

14.00€

Showing 1 to 20 of 355 (18 Pages)