Spray adhesive MOTIP 500ml transparent
Use MOTIP Glue to glue paper, cardboard, wood, textiles, cork, leather and various types of plastic for both permanent and temporary adhesion.
Suitable for gluing large surfaces
The spray pattern is about 10 centimeters wide
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.
The surface should be clean, dry and free of grease. The aerosol should have room temperature.
Best processing temperature 10 to 25°C. Before use, shake the aerosol.
Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply glue in an equal layer.
For a permanent adhesion, treat both parts to be glued, allow to dry 15 to 20 minutes and firmly press together.
For a temporary adhesion, treat one of the parts to be glued, allow to dry for 5 to 10 minutes and firmly press together.
When treating porous surfaces, apply several layers.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).