Pullers

Refine Search

Axle Remover (10969)

Axle Remover (10969)

Descriptionnew modelfor removing the constant-velocity joints on the front drive shaftsfits for most..

22.00€

Axle Remover (A-037A)

Axle Remover (A-037A)

Quickly removes the CVJ from the drive shaft without damaging joint. Reduces risk of damage transmis..

13.00€

Ball joint remover height: up to 50 / 80mm | gap 22 mm (62806)

Ball joint remover height: up to 50 / 80mm | gap 22 mm (62806)

Descriptionadjustable in 2 stepscan be used in passenger cars and vansHeavy versionfor use with 17 m..

35.00€

Ball joint remover with handle | working width 17 mm (YT-0613)

Ball joint remover with handle | working width 17 mm (YT-0613)

Product descriptionPuller for 17 mm ball pins.Technical dataLength [mm] 265Carbon steel materialSize..

14.00€

Ball joint remover with handle | working width 20 mm (YT-0614)

Ball joint remover with handle | working width 20 mm (YT-0614)

Product description20 mm spiral puller.Technical dataLength [mm] 275Carbon steel materialSize [mm] 2..

15.50€

Ball joint Remover | 19mm (1807)

Ball joint Remover | 19mm (1807)

Descriptionsuitable for many vehiclesforgedTechnical dataFork opening 19 mmMax. clamping width 50 mm..

23.00€

Ball joint Remover | two-height (S-20UBJ)

Ball joint Remover | two-height (S-20UBJ)

For removal of ball joints from steering rods...

10.00€

Ball joint Remover | two-height | 20-22mm (1795)

Ball joint Remover | two-height | 20-22mm (1795)

Descriptionforgedclamping range in 2 positions adjustable: up to 30 and 55 mmfor extracting the ball..

39.00€

Ball joint Remover | two-height | 20mm (1727)

Ball joint Remover | two-height | 20mm (1727)

For removal of ball joints from steering rods...

24.00€

Ball Joint Remover | vibro impact | for trucks and minibuses | Cr-Mo | 39mm (BJ39A)

Ball Joint Remover | vibro impact | for trucks and minibuses | Cr-Mo | 39mm (BJ39A)

CR-MO, Suitable for cars, light trucks and SUV.39 mm opening.80 mm opening at housing.90 mm max. pre..

45.00€

Ball joint Remover | working width 18-22 mm (YT-06122)

Ball joint Remover | working width 18-22 mm (YT-06122)

Product descriptionProfessional puller for ball pins. Thanks to the possibility of adjustment, it is..

15.00€

Ball joint Remover | working width 28 mm (1967)

Ball joint Remover | working width 28 mm (1967)

displaces the joint from axles, elbows, stabilizers- Very suitable for narrow spaces- Suitable for w..

16.00€

Ball joint seperator (G02586)
Ball Joints Remover (H3070410)
External / internal remover, 2-leg | 50 - 145 mm / 70 - 170 mm (7737)

External / internal remover, 2-leg | 50 - 145 mm / 70 - 170 mm (7737)

Descriptionsuitable as inside and outside pullerClamping range as inside puller 40 - 145 mmClamping ..

33.00€

EXTRA LARGE INNER TIE ROD TOOL | 40-47 mm (YT-061602)

EXTRA LARGE INNER TIE ROD TOOL | 40-47 mm (YT-061602)

Professional, large wrench for unscrewing and screwing steering rods. The wide range of supported si..

19.00€

FRONT END BALL SERVICE SET (YT-06157)

FRONT END BALL SERVICE SET (YT-06157)

Product descriptionProfessional set of 5 strong pullers for the ends of the steering rods.6PCS: LARG..

50.00€

Hub removal tool with hammer

Hub removal tool with hammer

2.5 kg Sliding hammer with 570 mm shaftTwo-grip puller:Internal Ø 35 - 110 mm, height 82 mmOuter Ø 5..

85.00€

Showing 1 to 18 of 33 (2 Pages)